Central Suction for Wards
A Hospital Vacuum Pump connects to many rooms at once. This vacuum pump has two pump heads on one frame. The Hospital Vacuum Pump runs one head at a time. The second head is a backup. The pump moves 120 liters of air per minute. Many large hospitals use this for their central system. The pump serves up to 10 patient rooms at the same time.
Automatic Switchover
The has a control panel with two timers. The first pump runs for 8 hours. Then the control switches to the second pump. The does this switch by itself. The backup pump never sits still for too long. The has a large receiver tank. The tank holds 50 liters of vacuum. The tank has a drain valve at the bottom. You empty water from the tank once per week.
Technical Data Table
|
Parameter |
Value |
|
Air Flow |
120 L/min |
|
Pump Heads |
2 units |
|
Tank Size |
50 liters |
|
Switch Interval |
8 hours |
|
Room Capacity |
Up to 10 rooms |
Built for 24/7 Running
A can run all day and all night. This vacuum pump has oversized bearings for long life. The comes with a set of spare vanes. The vanes are easy to replace in 10 minutes. The pump has a thermal protection switch. The switch stops the pump if it gets too hot. Buy this for your new hospital wing. You will not need a second backup system.
Hot Tags: hospital vacuum pump, China hospital vacuum pump manufacturers, suppliers, factory, Dry running vacuum pump, Sliding Vane Vacuum Pump, vacuum pump control valve unit, vacuum pump diaphragm valve unit, vacuum pump lubrication bearing system, vacuum pump thrust bearing system
