Empty Capsule Filling Machine

Fill Empty Shells Fast

An Empty Capsule Filling Machine puts powder into empty capsule shells. This capsule filling machine holds 400 capsules on a plate. The Empty Capsule Filling Machine separates the caps from the bodies first. The machine drops the bodies into a lower plate. The caps stay on the top plate. Many small labs use this for test batches. The machine is manual but fast.

Tamping Station for Powder

The has a powder tray and a tamper. You pour powder over the capsule bodies. Then you push the tamper down. The presses the powder into the bodies. You do this step two or three times. The machine has a closing plate at the end. The closing plate pushes the caps onto the bodies. The comes with a set of change parts for different capsule sizes.

An works without any power. This capsule filling machine uses a hand crank on the side. One turn moves the plates to the next station. The has a steel frame that stays flat on the table. The machine weighs 8 kg so it does not slide. You can clean it with soap and water. The has no motor or wires to break. Buy this for your R&D department. It will last for 20 years.